How To Reset Maintenance Light On Toyota Camry | Updated

To reset the maintenance light on a Toyota Camry 2021, you will need to use the OBD II scanner. Connect the scanner to the car’s port and reset the light.

There is a switch on the dashboard that you can toggle to turn off the maintenance required light.

The maintenance required light on a 2012 Toyota Camry can be reset by inserting a key into the ignition and turning it to the ON position. Then, press and hold the odometer reset button until the Maintenance Required light goes off.

To reset the maintenance light on a 2015 Camry, you will need to use a scan tool. Connect the scan tool to the vehicle’s diagnostic port and turn the ignition to the on position. Press and hold the brake pedal and turn the key to the start position. The maintenance light will turn off after a few seconds.

The reset procedure for the maintenance light on a 2014 Toyota Camry is as follows:
1. Turn the ignition switch to the ON position.
2. Press and hold the odometer reset button.
3. Turn the ignition switch to the LOCK position.
4. Release the odometer reset button.

To reset the maintenance light on a 2017 Toyota Camry, first turn the ignition to the ON position. Next, press and hold the trip reset button until the maintenance light turns off.

The oil light on a 2016 Toyota Camry can be reset by turning the engine off and then on again.

To reset the maintenance light on a 2013 Toyota Camry, you will need to use the Toyota Diagnostic System (TDS) or an equivalent scan tool. Once you have connected the scan tool, select “Reset Maintenance Light” from the menu.

To reset the maintenance light on a 2013 Toyota Camry push button, you will need to use the diagnostic tool. The tool can be accessed through the OBDII port, which is located under the dashboard on the driver’s side. Once you have the tool connected, you will be able to reset the light.

There are a few reasons why your maintenance light might be on. One possibility is that the light is simply on because it’s time for a scheduled maintenance check-up. Another possibility is that there’s a problem with one of your car’s systems that needs to be fixed. If you’re not sure what’s causing the light to come on, it’s best to take your car in for a diagnostic check-up so a technician can figure out what’s going on.

On a 2010 Toyota Camry, the maintenance light reset procedure is as follows:
1. Turn the ignition key to the ON position, but do not start the engine.
2. Push and hold the odometer reset button (located to the right of the steering wheel).
3. Turn the ignition key to the LOCK position.
4. Release the odometer reset button.
5. Turn the ignition key to the ON position.