The maintenance light on a Toyota Highlander can be reset by following these steps:
- Open the hood and locate the oil dipstick.
- Remove the dipstick and wipe it clean with a cloth or paper towel.
- Reinsert the dipstick and pull it out again. Check the oil level and make sure it is between the “Low” and “High” marks on the dipstick.
FAQs
The maintenance light on a Toyota Highlander 2018 can be reset by using the car’s computer. The procedure is as follows:
Turn the ignition to the ON position
Press and hold the odometer button
Turn the ignition off
Release the odometer button
Press and hold the odometer button again
The maintenance light on a 2015 Toyota Highlander can be reset by pressing the odometer button and holding it for three seconds.
To turn off the maintenance light on a 2017 Toyota Highlander, you will need to use the Diagnostic Trouble Code (DTC) reader. The procedure for doing this is as follows:
Turn the ignition switch to the ON position.
Connect the DTC reader to the DLC3 connector.
Turn the ignition switch to the LOCK position.
Press and hold the brake pedal.
The maintenance light on a 2017 Toyota Highlander can be reset by following these steps:
Turn the ignition switch to the ON position.
Press and hold the odometer reset button.
Turn the ignition switch to the LOCK position.
Release the odometer reset button.
The oil maintenance light on a 2012 Toyota Highlander can be reset by following these steps:
Turn the ignition key to the “ON” position, but do not start the engine.
Press and hold the “O/D OFF” button for about three seconds.
The “OIL MAINTENANCE” light will blink for a few seconds, then turn off.
Release the “O/D OFF” button.
To reset the maintenance light on a 2016 Toyota Highlander, you will need to use the scan tool. Connect the scan tool to the vehicle and turn the ignition on. Press and hold the brake pedal and then press and release the start button. The maintenance light should reset.
The maintenance light on a 2014 Toyota can be reset by following these steps:
Turn the ignition to the ON position.
Press and hold the trip meter reset button.
Turn the ignition off.
Press and hold the trip meter reset button again.
The maintenance light should now be off.
To reset your Toyota maintenance, first locate the “maintenance required” light on your dashboard. Once you’ve found it, press and hold the reset button until the light goes off.
The oil light on a 2009 Toyota Highlander can be reset by turning the car off and on again.
See Also: How Do I Connect Google Maps To Toyota Navigation?
