UE stands for “unbalanced load.” When this error code appears, it means that the washer is unable to complete its cycle because of an unbalanced load. This can be caused by too many items being loaded into the washer at once, or by items that are too large or heavy.
FAQs
If your washing machine is experiencing UE (unbalanced loads), there are a few things you can do to try and fix the issue. First, check to make sure that the load is evenly distributed in the washer. If it’s not, redistribute the clothes so that they are more evenly spread out. You can also try adding some towels or blankets to the load to help stabilize it.
UE is an error code that can indicate a number of different problems with your Samsung washer. If your washer is displaying the UE error code, try unplugging it and plugging it back in. If that doesn’t work, you may need to call a technician to help you troubleshoot the problem.
To balance your Samsung washer, you will need to find the center of gravity. This can be done by placing a weight on top of the washer and seeing where it falls. Once you have found the center of gravity, you can then use the adjustment screws on the back of the washer to balance it.
The drum on a washing machine is balanced so that it spins evenly when the machine is in use. If the drum becomes unbalanced, it can cause the machine to vibrate excessively and may even cause it to break. To rebalance the drum, you can add or remove clothes, water, or detergent from the machine. You can also try rotating the drum by hand to see if that fixes the imbalance.
There are a few things you can try to fix your Samsung UE error. First, make sure your device is up to date with the latest software. If that doesn’t work, try resetting your device to its factory settings. If neither of those solutions work, you may need to take your device in for service.
If your Samsung washer is not spinning properly, there are a few things you can do to try to fix the problem. First, make sure that the washer is properly leveled. If it is not, this can cause the washer to vibrate and not spin properly. You can also try cleaning out the drain pump filter to ensure that it is not clogged. If neither of these solutions fixes the problem, you may need to replace the drain pump.
There are a few things that could cause a Samsung washer not to spin. One possibility is that the washer is not properly balanced. If the load is unbalanced, it can cause the washer to vibrate excessively and prevent it from spinning properly. Another possibility is that there is something blocking the washer’s drainage system, which can prevent it from draining properly and causing it to stop spinning.
Unplug the washing machine.
Open the door and locate the drainage hose on the right side of the machine.
Place a bucket or container under the drainage hose.
Twist the hose to loosen it from the machine.
Pull the hose out from the machine and place it in the bucket or container.
Close the door and plug in the washing machine.
The drain pump filter on a Samsung washer can be cleaned by removing the filter and rinsing it off under running water.
The debris filter is located on the front of the Samsung top load washer. It is a small, rectangular panel that is covered in mesh. The mesh is designed to catch any large pieces of debris or clothing that may be washed with the clothes.
See Also: How To Set Up Voicemail On Samsung S21
