There are as many reasons to remove window tint as there are reasons to have one. Window tint is a great way to add privacy, reduce glare, and protect your car’s interior from sun damage. This helps reduce the risk of skin cancer by blocking up to 99% of UV rays.
However, if the need to remove tint from your auto window arises, you can save some bucks doing it yourself. This article explains expert DIY tricks on how to remove window tint. Whatever the reason you intend to remove your window tint, this article will guide you through.
Table of contents
How to Remove Window Tint | Expert DIY Tricks
To remove window tint, you must be patient and pay strict attention to detail. First, you need to gather the materials below.
- Razor blade or sharp knife
- Ammonia-based window cleaner or soapy water
- Black garbage bags or trash bags
- Paper towels or a clean cloth
- Hairdryer or heat gun
- Plastic or vinyl gloves
Here’s a step-by-step guide to help you remove window tint:
Step 1: Park in a Sunny Area
If possible, park your vehicle in a sunny area. The heat from the sun will help soften the adhesive on the tint, making it easier to remove.
Step 2: Cut Garbage Bags
Cut black garbage bags to fit the size of your window. You’ll use these to cover the inside of the window after spraying with the ammonia-based cleaner.
Step 3: Protect Interior
Place garbage bags over the interior of the window, ensuring they cover the entire glass surface. This will protect the interior from any ammonia-based cleaner.
Step 4: Score the Tint
Use a razor blade or sharp knife to score the corner of the window tint. Make a small cut so you can start peeling it off.
Step 5: Peel Off Tint
Slowly peel off the tint, pulling it away from the glass. If the tint resists, you can use the razor blade to lift the edge and continue peeling. Take your time to avoid tearing the tint.
Step 6: Apply Heat
If the tint doesn’t come off easily, use a hairdryer or heat gun to warm the tint. Hold the heat source about 2-3 inches away from the tint and move it around to evenly distribute the heat. This will further soften the adhesive.
Step 7: Continue Peeling
Once the tint is warmed up, continue peeling it off. The heat will make the adhesive more pliable, making it easier to remove.
Step 8: Clean Residue
After removing the tint, you may have some adhesive residue left on the glass. Spray the ammonia-based cleaner or soapy water on the residue and use the razor blade to scrape it off. Wipe the glass clean with a paper towel or cloth.
Step 9: Final Clean
Clean the interior and exterior of the window thoroughly to remove any remaining residue or cleaner.
Read Also: Why Are Rolls-Royce So Expensive? Top 10 Reasons
How to remove window tint glue
To remove window tint glue, follow these steps:
- Scrape off the adhesive backing from the tint.
- Use a heat gun to soften the glue.
- Peel off the tint
- Clean the window glass
- Remove any remaining glue residue.
- Rinse the window with water and dry it completely
Read Also: How Do They Get Cars into Malls? Everything to Know
What is the easiest way to remove window tint film?
The easiest way to remove window tint film is to use a steamer. A steamer will loosen the adhesive on the film, making it easy to peel off.
To use a steamer, simply hold it close to the film and move it back and forth until the film starts to peel off. You can then use your fingers or a razor blade to carefully remove the rest of the film.
Read Also: How Many Spark Plugs Does a Diesel Engine Have?
Is new window tint easy to remove?
New window tint is generally easier to remove than older tint because the adhesive is still relatively soft. However, it is still important to use caution when removing tint, as you can scratch the window glass if you are not careful.
Read Also: How To Pump Gas (First Timers Guidelines To Consider)
Does vinegar remove window tint?
Vinegar is not an effective way to remove window tint. While it may soften the adhesive slightly, it will not completely remove the tint or the adhesive residue. It can damage the tint film itself because Vinegar it is acidic in nature.
How do you remove baked tint from a window?
Removing baked-on tint from a window can be a challenging task, but it is possible with the right tools. To remove baked tint from a window, do this:
- Soak the window with ammonia
- Scrape off the tint
- Use a heat gun to soften the glue.
- Peel off the tint
- Clean the window glass
- Remove any remaining glue residue
- Rinse the window with water and dry it completely.
Frequently Asked Questions
Ammonia, isopropyl alcohol, acetone, and window tint remover are some effective liquid that removes window tint.
Most companies charge between $2 and $3 per square foot to remove tinting from windows. On average, you can expect to pay anywhere from $100 to $300.
To remove window tint without a heat gun
Use a solvent to soften the adhesive
Scrape off the tint
Remove any remaining glue residue
Clean the window glass
Rinse the window with water and dry it completely.
No, rubbing alcohol will not damage tint if it is used properly. In fact, rubbing alcohol can be used to clean tint and remove streaks and smudges
It typically takes anywhere from 30 minutes to 2 hours to remove window tint from a car.
Conclusion
Removing window tint can be a time-consuming process. With patience and carefulness, you can save some bucks removing window tint yourself. Read through this DIY expert trick for a step by step guide.
References
- Forbes.com – How To Remove Window Tint
- WikiHow.com – How to Remove Window Tint: 14 Steps (with Pictures)
- Tintdude.com – How to Remove Car Window Tint (the RIGHT Way)
Recommendations
