Studies show that petroleum engineers now use supercomputers to automate oilfield production and drilling operations. They are also developing and applying new technologies to recover hydrocarbons from oil shale and offshore oil and gas fields.
If you wish to have this kind of world-class career, then the graduate degree program in petroleum engineering at Texas Tech University is the sure bet for you.
It is important that you get to know the admission requirements as well as the programs in the petroleum engineering department.
Texas Tech is the seventh-largest university in Texas and the largest higher institution in the western two-thirds of the U.S. According to the 2015 Princeton Review, Texas Tech is ranked among the best schools in the U.S.A.
In addition, the 2016 U.S News & World Report puts Texas Tech #168 in the list of the best universities in the world.
On the other hand, the department of petroleum engineering at Texas Tech University offers bachelor’s, master’s, and doctoral degree programs to its students.
The department emphasizes much on research and innovation. Its essence is to ensure that its graduates acquire the most recent skills for the oil and gas sector.
In this article, we have for you all information about the petroleum engineering department at Texas Tech University. You will know the admission requirements, the courses that you’ll take, the cost, and the scholarships available.
Table of contents
- What is Petroleum Engineering?
- Why study Petroleum Engineering at Texas Tech University?
- What Petroleum Engineering programs are available at Texas Tech University?
- Texas Tech Undergraduate Program Curriculum
- Texas Tech Petroleum Engineering Graduate Program Curriculum
- Texas Tech Petroleum Engineering PhD. Program Curriculum
- What are the admission requirements for Texas Tech Petroleum Engineering Program?
- What is the Texas Tech University Petroleum Engineering Acceptance Rate?
- How Much Does Petroleum Engineering Program Cost at Texas Tech University?
- Scholarships and Financial Aids at Texas Tech University’s Department of Petroleum Engineering
- How do I apply to Texas Tech’s Department of Petroleum Engineering?
- FAQs on the Petroleum Engineering Program at Texas Tech University
- References
- Recommendations
What is Petroleum Engineering?
This is the branch of engineering whose focus is on the development and exploitation of crude oil and natural gas fields. In addition, it deals with technical analysis, computer modeling, and prediction of the future performance of oil and gas.
Mining engineering and geology gave rise to petroleum engineering. It has a close connection with geoscience which enables engineers to understand the geological structures and conditions favorable for petroleum deposits.
Meanwhile, petroleum engineers bring solutions to problems that contribute to energy security and national prosperity. For you to be successful in this field, you must have knowledge of physics, geology, chemistry, and mathematics.
Why study Petroleum Engineering at Texas Tech University?
Ever wondered why Texas Tech is the best place for a degree program in petroleum engineering? Well, below are the reasons for recommending this university for you.
The department of petroleum engineering at Texas Tech is known as the Bob L. Herd Department of Petroleum Engineering. This department offers its students the technical knowledge to develop, produce, and manage petroleum reserves efficiently.
Students at Texas Tech will receive excellent instruction and design experiences that will enable them to enter the field and pursue life-long professional development.
On the other hand, the appropriate curriculum at Texas Tech helps the students to be successful in different career paths in the petroleum sector.
The university enables its students to graduate, pass the Fundamentals of Engineering Exam, and pass the Professional Exam.
Get to know: 15 Best Petroleum Engineering Schools in the World | 2022 Ranking
What Petroleum Engineering programs are available at Texas Tech University?
The Bob L. Herd Department of Petroleum Engineering at Texas Tech University offers three academic programs. They include Bachelor of Science in petroleum engineering, Master of Science in petroleum engineering, and Ph.D. in petroleum engineering.
Each of these programs is aimed at offering students the appropriate knowledge and skills that the oil and gas industry requires. It also exposes them to the recent methods used in oil exploitation.
Interestingly, Texas Tech’s undergraduate petroleum engineering program is ranked 4th in the United States. The U.S News & World Report also ranks Texas Tech’s graduate petroleum engineering program 9th in the nation.
Texas Tech Undergraduate Program Curriculum
The undergraduate degree curriculum at Texas Tech is offered by the Bob L. Herd Department of Petroleum Engineering. It aims at offering students the research experience required to develop and manage petroleum reserves efficiently.
Upon graduation, students will:
- apply the knowledge of mathematics, science, and engineering
- create and carry out experiments, as well as analyze and interpret data for the petroleum industry
- be able to utilize the skills, methods, and modern technology that the engineering sector requires
- have the ability to communicate effectively, identify, formulate, and solve engineering problems
In the table below, you will see the petroleum engineering curriculum for the bachelor’s degree program at Texas Tech University. The curriculum for each semester is taken based on credit hours.
| FIRST YEAR | SECOND YEAR | THIRD YEAR | FOURTH YEAR | ||||
| Fall (17) | Spring (17) | Fall (17) | Spring (18) | Fall (17) | Spring (19) | Fall (13) | Spring (14) |
| CHEM 1307 | Oral Communications | CE 2301 OR ME 2301 | MATH 3350 | PETR 3303 | PETR 3107 | PETR 4121 | PETR 4222 |
| CHEM 1107 | ENGL 1302 | ME 2322 | PETR 4331 | PETR 3103 | PETR 3307 | PETR 4300 | PETR Senior Elective III |
| ENGL 1301 | POLS 2306 | MATH 2450 | PETR 2322 | PETR 3105 | PETR 3304 | PETR Senior Elective I | PETR Senior Elective IV |
| POLS 1301 | MATH 1452 | PHYS 2401 | PETR 3302 | PETR 4303 | PETR 3306 | PETR Senior Elective II | ENGR 2392 |
| MATH 1451 | PHYS 1408 | GEOL 3324 | CE 3305 OR ME 3370 | IE 2324 | CE 3302 OR ME 2302 | Creative Arts | HIST 2301 |
| ENGR 1315 | CE 3303 OR ME 3403 | GEOL 4334 | ENCO 3350 | ||||
| MATH 3342 OR IE 3341 | HIST 2300 |
Read: 13 Best Petroleum Engineering Universities In UK | 2022
Texas Tech Petroleum Engineering Graduate Program Curriculum
The MS program in petroleum engineering at Texas Tech requires a minimum of 30 graduate credit hours with 6 credit hours for the thesis.
Students must have to write a thesis for the exact master’s degree. Additionally, a thesis committee will give a final oral exam to the student in defense of the completed thesis.
Alternatively, the department also offers a non-thesis master’s program that needs a minimum of 33 graduate credit hours.
This must be approved by the graduate advisor. The aim is to help the candidate’s educational background, industry experience, and personal interest.
For the two programs (thesis and non-thesis), the candidate must take and pass a final comprehensive examination. Students can only take comprehensive examinations after the graduate dean admits them to candidacy.
On the other hand, Texas Tech offers a combined B.S. & M.S. degree program in petroleum engineering.
Students that wish to pursue the double-degree program should notify their academic advisor during the first semester of the undergraduate year. In addition, they must meet all graduate admission requirements of the petroleum engineering department.
The graduate courses at Texas Tech’s department of petroleum engineering are taken based on credit. Students must score a grade of “B” or higher in all graduate courses before graduation.
Also, they are not permitted to have over six hours of PETR 6300 in their master’s degree plan without approval from the graduate dean.
The curriculum is divided into four (4) core areas and students are required to choose at least one course from each of the five core areas.
Students for the graduate degree program must register for PETR 5121 each semester unless the chairperson excludes the particular student. However, the seminar course does not count during the graduate program.
Check out the: 12 Best Petroleum Engineering Schools Online | 2022
Texas Tech Petroleum Engineering PhD. Program Curriculum
The PhD program in petroleum engineering at Texas Tech offers students knowledge of the advanced methods of research, analysis, and synthesis in the field. It focuses primarily on research.
So, to apply for the PhD program, applicants must have a degree in engineering disciplines. In addition, they must obtain approval from the graduate committee of the Bob L. Herd Department of Petroleum Engineering.
All doctoral students must take diagnostic examinations by the end of their second semester. The diagnostic examinations must be taken according to students’ areas of specialization and any three-core areas.
On the other hand, PhD applicants must demonstrate high proficiency in a single research area. There is no specific foreign language requirement. However, a student’s dissertation advisor may specify a foreign language for the Ph.D. program.
Furthermore, Ph.D. courses at Texas Tech’s department of petroleum engineering are taken based on credit. Students must score a grade of “B” or higher in all graduate courses before graduation. Students are not permitted to have over six hours of PETR 6300 in their doctoral degree plan without approval from the graduate dean. The curriculum is divided into four (4) core areas.
PhD students must register for PETR 5121 each semester unless the chairperson excludes the particular student. However, the seminar course does not count during the PhD program.
Read also: List Of Petroleum Engineering Universities In Australia | 2022
What are the admission requirements for Texas Tech Petroleum Engineering Program?
Before applying to the Department of Petroleum Engineering at Texas Tech, it is important that you know the admission requirements. The petroleum engineering requirements for admission at Texas Tech are divided into undergraduate and graduate.
Texas Tech Petroleum Engineering Undergraduate Admission Requirements
Below are the admission requirements for the undergraduate program at the Bob L. Herd Department of Petroleum Engineering:
Applicants must possess a 3.4 GPA with 30+ hours and must have completed the following courses with a ‘C’ or higher in:
- ENGL 1301
- ENGL 1302
- MATH 1451
- MATH 1452
- CHEM 1307 & 1107
- MATH 2450
- PHYS 1408
- ME 2322
- PHYS 2401
- GEOL 3324
- PETR 1305 OR ENGR 1315
- CE 2301 OR ME 2301
Texas Tech Petroleum Engineering Graduate Admission Requirements
To be eligible for the graduate petroleum engineering program at Texas Tech University, applicants must possess the following:
- Bachelor of Science in Petroleum Engineering with a GPA >3.0.
- Evidence of financial support
- Official transcript
- Evidence of proficiency in English (TOEFL, IELTS, PTE Academic, Cambridge CPE, Cambridge CAE or Completion of ELS Level 112 )
- Official GRE scores (applicant may get GRE waiver if he/she has two years or more experience in the Oil and Gas Industry)
- Three letters of recommendation
What is the Texas Tech University Petroleum Engineering Acceptance Rate?
Admissions to the Texas Tech’s petroleum engineering program is quite competitive. What this means is that applicants should ensure that they meet the criteria for admission before sending their applications.
Hence, the petroleum engineering acceptance rate at Texas Tech University is 63%.
Read: 10 Best Masters in Petroleum Engineering Online Programs | 2022
How Much Does Petroleum Engineering Program Cost at Texas Tech University?
Tuition and fees at Texas Tech are paid according to the minimum full-time load of hours per academic year. The program cost will vary depending on hours taken per semester plus course- and program-specific fees.
In addition, students are advised to confirm from the department the number of hours each semester will take so as to make adequate plans.
Hence, the tuition fee for the petroleum engineering program at Texas Tech is $10,817 for in-state and $18,413 for out-of-state.
Scholarships and Financial Aids at Texas Tech University’s Department of Petroleum Engineering
The scholarships available at Texas Tech University for petroleum engineering students are divided into undergraduate scholarships and graduate scholarships.
Undergraduate Scholarships
Texas Tech University through its Whitacre College of Engineering offers several externally funded undergraduate scholarships.
If you are an incoming freshman or a transfer student, click here to apply for an undergraduate scholarship. On the other hand, current students should click here and click on the link below General Scholarship Information to apply.
The moment you apply, you will be matched to a scholarship for which you qualify for.
On the other hand, the department of petroleum engineering provides merit based scholarships to students. Incoming freshman, transfer students, and current students can apply for this scholarship by clicking here.
Graduate Scholarships
There are several fundings that are available to graduate students in the department of petroleum engineering at Texas Tech University.
Teaching assistantships are available to graduate degree students in the petroleum engineering department of Texas Tech. Students should note this position is limited in number and most awarded to Ph.D. students.
Additionally, students that wish to win TA positions must take and pass an ITA workshop. This ITA workshop is an intensive English course that the Texas Tech offers at the end of every summer.
Students under the teaching assistantship are required to work for the department 20 hours per week and their research for 40 hours per week.
The research assistantship depends on the department of petroleum engineering’s research activity. The salaries of research assistants are comparable to teaching assistants. With the help of this salary, students can pay for their living expenses and tuition fees.
How do I apply to Texas Tech’s Department of Petroleum Engineering?
While starting your application to Texas Tech’s petroleum engineering program, ensure that you meet the admission requirements first. Afterward, you read the application instructions very well to avoid unnecessary mistakes.
The deadline for applications vary from one program to another. So, make sure that you verify very well the deadline for the exact program you’re applying for.
During your application, you will have to attach unofficial copies of transcripts and test scores. This is for the sake of evaluation purposes.
Upon gaining admission, you will have to submit official transcripts, diplomas/degree certificates, and test scores. Texas Tech advises that applicants do not send official transcripts until they receive a notification of acceptance from the university for graduate programs.
For the graduate degree program, applicants will have to provide supplemental materials for admission review. The supplemental materials include a statement of purpose, recommendations, writing samples, creative portfolios, etc. Meanwhile, the department will have to review the supplemental materials that applicants will submit.
Once you complete filling in your details, ensure to review your application before submitting it. If you fail to include important details or submit incorrect information, your admission will be delayed. So, this is the reason why we advise that you carry out a review first before submitting your application.
Finally, you can always check your application status on the Raiderlink Portal’s Applications tab. If it is your first time applying, you will receive your login information between 1 to 5 days after your information has been uploaded to Texas Tech’s database.
If you wait for the stipulated time and you do not get your login information, kindly send the university an email to graduate.admissions@ttu.edu with your full name, date of birth, term applied to, and program applied for. Once you do this, the university will resend your log-in information to you.
FAQs on the Petroleum Engineering Program at Texas Tech University
The bachelor of science petroleum engineering program at Texas Tech is accredited by the Engineering Accreditation Commission of ABET.
The Bob L. Herd Department of Petroleum Engineering accepts students every December so that they can start their coursework that Spring.
The department is highly competitive as it accepts only 250 students every December.
The department does not guarantee that your application will be considered. To stand a chance for an admission into the petroleum engineering program, you must have a minimum of 3.4 Texas Tech GPA as well as all of the foundational curriculum finished.
References
Recommendations
- 15 Best Bachelor In Petroleum Engineering Programs In 2022
- Best Accredited Petroleum Engineering Schools in California | 2022
- Petroleum Engineering Major: Which Option Pays More Than Others In 2022?
- Best Accredited Petroleum Engineering Schools in Texas | 2022
- Petroleum Engineering in Canada: Schools, Scholarships, Cost, Programs
- What is Petroleum Engineering Technology| Job Description, Salary, Schools, Cost
Does this article meet your immediate needs? If yes, leave us with a 5-star rating in the Review Box below. If no, leave us an opinion in the comment box to express your concern or ask a question and we will get back to you as soon as possible.