There are a few ways to reset the maintenance light on a Toyota 4runner. One way is to use the keypad located on the driver’s side door. To do this, press and hold the “0” button for about five seconds. The light will then turn off. Another way is to use the instrument cluster. To do this, press and hold the “reset” button for about five seconds. The light will then turn off.
FAQS
The 2017 Toyota 4runner has a maintenance light that can be reset by following these steps:
Turn the ignition to the ON position.
Press and hold the odometer reset button.
Turn the ignition off and then back to the ON position.
Release the odometer reset button.
To reset the maintenance light on a 2015 Toyota 4runner, you will need to use the vehicle’s diagnostic system. First, turn the ignition to the ON position and wait for the vehicle’s warning indicators to turn off. Next, press and hold the brake pedal, then press and hold the power button. Finally, release both buttons and press and hold the power button again. When the light turns off, you will know that the reset process has been successful.
The reset procedure for the maintenance light on a 2018 4Runner depends on the type of reset button your vehicle has. If your 4Runner has a mechanical reset button, you can reset the maintenance light by turning the key to the “on” position and then pressing and holding the reset button while turning the key to the “off” position. If your 4Runner has an electronic reset button, you can reset the maintenance light by pressing and holding the button until the light turns off.
There are a few ways to reset the maintenance light on a 2003 Toyota 4runner. One way is to disconnect the battery for a few minutes, then reconnect it. Another way is to use a scan tool to reset the light.
The maintenance light on a 2016 Toyota 4runner can be reset by following these steps:
Turn the ignition off.
Hold down the brake pedal and turn the ignition to the ON position.
Press and hold the trip meter reset button until the “T” flashes.
Release the button and press it again. The “M” should now be flashing.
Hold down the button until the “M” goes out.
The Toyota 4Runner maintenance light reset procedure depends on the year of your vehicle. For 2012 models, you will need to use a scan tool to reset the light.
The maintenance light on a 2014 Toyota 4runner can be reset by turning the vehicle off, then on again.
To reset the oil maintenance light on a 2020 Toyota 4runner, you will need to use the trip meter. First, make sure the car is turned off and the key is out of the ignition. Next, locate the trip meter and press the reset button. Hold the button down for a few seconds until the light goes out.
To reset the maintenance light on a 2011 Toyota 4runner, first turn the engine off. Next, locate the “reset” button, which is usually located near the fuse box. Push and hold the button for a few seconds until the light goes off.
See Also: How Long Do Toyota Camrys Last?
