The Toyota Prius has a maintenance light that comes on to remind the driver to have the car serviced. The light can be reset by pressing and holding the trip meter button for three seconds.
FAQS
The maintenance light on a 2015 Toyota Prius can be reset by pressing the “reset” button on the instrument panel.
The maintenance light on a 2014 Toyota Prius can be reset by turning the car off and then back on again.
The maintenance required light on a Prius can be reset by pressing the odometer reset button for two seconds. The light will then turn off.
The maintenance required light is usually an indicator that the car needs an oil change. To turn it off, you will need to take your car to a mechanic and have them change the oil.
There are a few ways to reset the oil maintenance light on a 2013 Toyota Prius. One way is to use the touch screen on the car. Another way is to use the key fob. The last way is to use the Diagnostic Port.
The maintenance required light on a 2007 Toyota Prius can be reset by pressing the odometer reset button while turning the ignition key to the “on” position.
To put your Prius in maintenance mode, press and hold the power button for about 10 seconds until the car beeps. The “maintenance” light will come on, and you can then release the button.
The maintenance light on a 2013 Toyota Prius C can be reset by pressing the “reset” button on the instrument panel. The light will go off after a few seconds.
The maintenance light on a 2012 Prius can be reset by pressing and holding the “M” button for about 5 seconds.
The 2016 Toyota Prius has a maintenance light that is reset by a dealer.
The maintenance light on a 2013 Toyota Prius C can be reset by pressing the “trip” button and the “reset” button at the same time.
The oil maintenance light on a 2010 Toyota Prius can be reset by pressing the odometer reset button for two seconds.
The “maintenance required” light on a Toyota Prius means that the car needs a service. This could be anything from an oil change to a more comprehensive service. It’s important to get the car serviced when the light comes on, as not doing so could lead to more serious problems further down the line.
To put a 2007 Prius in maintenance mode, you need to first open the hood. Then, locate the two black boxes on either side of the engine. There is a small lever on the top of each box. Push the levers down and hold them in place. Next, turn the car off and remove the key from the ignition. Finally, wait 10 seconds and release the levers. The car will now be in maintenance mode.
To put a 2008 Prius in diagnostic mode:
1) Turn the car off.
2) Hold down the power button for 5 seconds.
3) Turn the car on while holding down the power button.
4) The car will now be in diagnostic mode.
See Also: Does Toyota Make Lexus