- To reset the Toyota Maintenance Light, you will need to use a scan tool.
- Once you have connected the scan tool, select “reset” or “clear” on the tool.
- This will reset the light.
FAQs
There are a few ways to reset the maintenance required light on a Toyota. One way is to disconnect the battery for a few minutes, then reconnect it. Another way is to use a scan tool to reset the light.
The maintenance required light can be turned off on a Toyota push start by pressing the “maintenance required” button.
The maintenance required light is usually located on the dashboard or instrument panel. It may be labeled “Maint Reqd” or “Oil Change.” Refer to your owner’s manual for the location of your maintenance required light and how to turn it off.
To reset the maintenance light on a Toyota 2020, you will need to use the diagnostic system. First, turn the ignition on and then press and hold the trip reset button. Next, use the brake pedal to press the diagnostic system button. Finally, release the trip reset button and then release the brake pedal.
There are a few ways to reset the maintenance light on a Toyota Camry. One way is to disconnect the car’s battery for a few minutes, then reconnect it. Another way is to use an OBDII scanner to reset the light.
There are a few ways to reset the maintenance light on a Toyota Camry. One way is to disconnect the car’s battery for a few minutes, then reconnect it. Another way is to use an OBDII scanner to reset the light.
To reset the maintenance light on a 2021 Toyota Camry with push button start, you will need to use the touch screen. First, turn the car on and press the “Settings” icon. Then, select “Maintenance” and “Reset Maintenance Light.
How do you reset the maintenance light on a 2011 Toyota Camry push button?
There are a few ways to reset the maintenance light on a 2011 Toyota Camry. One way is to use the key and turn it to the “on” position without starting the engine. Hold down the trip meter reset button until the maintenance light goes out. Another way is to use the car’s computer. Turn on the car and put it in park. Open the driver’s side door and wait for the chime to sound.
The maintenance required light on a 2012 Toyota Camry can be reset by following these steps:
1. Turn the ignition to the ON position
2. Press and hold the trip odometer reset button
3. While holding the trip odometer reset button, turn the ignition to the OFF position
4. Release the trip odometer reset button
5. Turn the ignition to the ON position.
See also Does Toyota Own Lexus?
