To reset the maintenance light on a Toyota Rav4, first, turn the key to the “off” position. Next, hold down the trip odometer reset button while turning the key to the “on” position. The maintenance light will then reset.
FAQS
The maintenance required light on a Toyota RAV4 can be turned off by pressing the “maintenance required” button for three seconds.
To reset the maintenance light on a 2015 Toyota RAV4, you will need to use the diagnostic port. The port is located in the driver’s side footwell, and you will need to use a special tool called an OBDII scan tool to reset the light.
The maintenance light on a Toyota rav4 2020 can be reset by following these steps:
Turn the ignition to the ON position.
Press and hold the trip odometer reset button.
While holding the trip odometer reset button, turn the ignition to the OFF position.
Release the trip odometer reset button.
Turn the ignition to the ON position.
To reset the maintenance light on a Toyota Rav4 2021, you will need to use the diagnostic port. Connect the scanner to the port and turn on the ignition. Press and hold the brake pedal and then press and release the start button. The light will flash, indicating that it has been reset.
To reset the maintenance light on a 2016 rav4 push-button start, you will need to use the OBDII scanner. Once you have the scanner, you will need to plug it into the port under the steering wheel. Once plugged in, turn the ignition on and select “read trouble codes.” The scanner will then tell you how to reset the light.
The maintenance required light on a 2012 Toyota Rav4 can be reset by following these steps:
Turn the ignition to the “ON” position.
Press and hold the “trip odometer reset” button.
Turn the ignition to the “OFF” position.
Press and release the “trip odometer reset” button.
To reset the maintenance light on a Toyota Rav4 with push button start, you will need to use the car’s computer. You can do this by pressing the “trip” button on the dashboard and holding it down for three seconds. A menu will appear on the screen with an option to reset the maintenance light.
The maintenance light on a 2013 Toyota Rav 4 can be reset by following these steps:
Turn the ignition to the “On” position.
Press and hold the “Menu” button.
Turn the ignition to the “Off” position.
Press and hold the “Menu” button.
Turn the ignition to the “On” position.
The maintenance light will be reset.
To turn off the maintenance required light on a Toyota push start, you will need to take your car to a dealership or service center. The light is turned off by a computerized system, and can only be turned off by someone with the proper knowledge and equipment.
To reset the maintenance light on a 2010 Toyota Rav4, you will need to use a scan tool. Connect the scan tool to the vehicle’s diagnostic connector, and turn the ignition on. Press and hold the reset button on the scan tool, and then release it. The maintenance light should now be reset.
Leave a Reply
You must be logged in to post a comment.